News - The Installation Of Vertical Blinds

The Installation Of Vertical Blinds

1. The method for measuring the size of the inner frame is the same as that for measuring the size of the outer frame. First, make sure that the depth of the window is enough for the shutter blades to move freely. Different installation methods require different window depths.

2. The depth of 8cm is required for fixed or flat installation; in addition to the width of the product blade, the number of layers of the product to be installed should also be considered during push-pull installation. Generally, two-layer push-pull requires 15cm depth to ensure blade movement, and a single fan needs 10cm depth; folding installation requires Reserve 10cm depth.

3. Fixed installation code all installation codes of the same product must be on the same line in the front, back and up and down directions. If there is a curtain box, the width of the section of the curtain box must be greater than 90mm. Remember to push the installation code slider to the end, then push the shutter, and rotate to straighten the shutter. If you want to retract the horizontal and vertical shutters, you must first turn the blades to be perpendicular to the wall and then pull them up. If you want to stop halfway or at the end, you need to turn the pull rope 45 degrees to the right, and the entire curtain will be automatically fastened. .

Note: For bay windows, large windows should use curtains composed of several separate curtains, each curtain can be tied separately, and a continuous soft curtain track is used to connect the curtains as a whole.